엑스캅터 - 8IGHT-T 3.0 Race Kit: 1/8 4WD Nitro Truggy - 드론장

전체상품목록 바로가기

본문 바로가기


| 8IGHT-T 3.0 Race Kit: 1/8 4WD Nitro Truggy 품절

(해외배송 가능상품)
추천메일   |   
상품조르기   |   
기본 정보
상품명 8IGHT-T 3.0 Race Kit: 1/8 4WD Nitro Truggy
판매가 590,000원 재입고 알림 SMS
적립금 5,900원 (1%)
제조사 / 원산지 TLR Racing / 대만
구매수량 수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

혜택
회원가입 포인트 무이자할부 적립금
배송비
무료 ~ 3,000원 (5만원 이상 무료)  |  도서산간 배송비 추가
장바구니
상품 옵션
옵션 선택
상품 목록
상품명 상품수 가격
8IGHT-T 3.0 Race Kit: 1/8 4WD Nitro Truggy   수량증가 수량감소 590000
총 합계금액 (수량)
0 (0개)
SOLD OUT 관심상품등록 장바구니 담기 바로구매하기예약주문



특징

  • 업그레이드된 서스팬션 구조
  • 16mm 쇽 및 탁력좋은 스프링
  • 옵션파트 포함
  • Gen 3 조종기 트레이
  • 업그레이드된 바디 및 윙
  • 강화 프론트,리어 및 센터 개뼈
  • 조정가능한 알류미늄 프론트 & 리어 피봇
  • 알류미늄 톱 서보 세이버
  • 블레이크 밸리버 스프링
  • 알류미늄 베에링 삽입
  • 경량 아우트드라버 샤프트
  • TiCN 쇽샤프트 및 힌지핀
  • 볼베어링 스테어링 팩
  • 리어링 및 피니언기어
  • 업그레이드된 드룹 나사
  • 메탈 서보 장착



Overview

A great truggy starts with a great buggy. The 8IGHT-T™ 3.0 truggy benefits from the same engineering and expertise that made the 8IGHT™ 3.0 buggy a ROAR National Champion. Everything from the suspension geometry to the body and wing design has been refined so it is easier for racers of all skill levels to drive faster and lower lap times. This superb handling, combined with ability to handle the most powerful engines and toughest tracks, make the 8IGHT-T 3.0 truggy a true contender for the world stage. 

Improved Suspension Geometry 
The suspension geometry is refined to give racers of all skill levels a neutral handling truggy that is easy to drive fast. 15-degree, non-inclined caster blocks raise the spindle, allowing the vehicle to soak up bumps with less dog bone plunge. Redesigned front arms improve front wheel clearance and increase steering throw. Camber and shock locations on the shock towers are optimized for quick and easy tuning. 

16mm Shocks and Tapered Springs 
The large bore shocks are easier to tune and include machined tapered pistons and shock bushings for greater precision. The tapered shock springs provide more spring-to-arm clearance and a progressive rate that keeps the ride plush over rough sections of track while still providing plenty of bottoming resistance for landing large jumps. Larger volume bladders with improved durability are also included. 

Optional Parts Included 
The kit comes with an impressive collection of optional parts that includes lightweight outdrives, a lightweight spur gear, adjustable hinge pin braces, a hard-anodized flywheel, an aluminum servo saver top, aluminum rear bearing inserts and more. 

Gen 3 Radio Tray 
The Gen 3 Radio tray provides better weight distribution and helps prolong servo life with molded index points that improve linkage alignment. A ball bearing-mounted throttle tri-horn keeps engine response smooth and precise. The switch location has been moved for easier access and the metal J-nut that secures the battery box reduces wear on the radio tray from chassis flex. 

Improved Body and Wing 
The body is a refined version of the revolutionary 8IGHT-T 2.0 truggy’s cab forward body. It’s complemented by a new rear wing with larger side plates that improves air flow and provides greater down force. An optional wickerbill system is included so you can fine tune stability for different track conditions.



Tech Notes

별도로 필요한것...
- .21급 아니면 28급 엔진
- 1/8스케일 매니폴드 
- 송수신기 세트
- 수신기배터리
- 스타트박스
- 부스터 
- 연료(25%) 
- 연료쭉쭉이 
- 도색연료(PS)
- 조립공구
- 1/8 트러기타이어,순간접착제


Specifications


Type: 1/8th Nitro Truggy
Scale: 1/8
Length: 18.75 in (476mm)
Width: 16.38 in (416.1mm)
Height: 7.30 in (185.5mm)
Wheelbase: 14.93-15.09 in (379-383mm)
Chassis: 4mm Plate, 7075-T6 Aluminum
Suspension: 4-wheel Independent
Drivetrain: 4WD
Motor or Engine: .21-.28 Nitro Engine
Gear Pitch: 1.0 MOD
Kit/RTR: Kit
Shock Type: 16mm bore with Bladders
Body: 8IGHT-T 3.0 Body
Ball Bearings: Full Precision Ball Bearings
Fuel Tank Capacity: 150cc
Experience Level: Intermediate
Assembly Time: 3-5 Hours





학교 및 연구기관 구매가이드

내맘대로 결제하기

카카오톡 플러스 1:1 문의


WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close