엑스캅터 - (최고급 초경량화 1/10 버기)TLR 22 3.0 SPEC-Racer MM Race Kit - 드론장

전체상품목록 바로가기

본문 바로가기


| (최고급 초경량화 1/10 버기)TLR 22 3.0 SPEC-Racer MM Race Kit

(해외배송 가능상품)
기본 정보
상품명 (최고급 초경량화 1/10 버기)TLR 22 3.0 SPEC-Racer MM Race Kit
판매가 399,000원
적립금 3,990원 (1%)
제조사 TLR Racing / 대만
원산지 중국
제품코드 P000BDSK
구매수량 수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

혜택
회원가입 포인트  무이자할부
배송비
무료 ~ 3,000원 (5만원 이상 무료)  |  도서산간 배송비 추가
장바구니
상품 옵션
옵션 선택
상품 목록
상품명 상품수 가격
(최고급 초경량화 1/10 버기)TLR 22 3.0 SPEC-Racer MM Race Kit   수량증가 수량감소 399000
총 합계금액 (수량)
0 (0개)
SOLD OUT 관심상품등록 장바구니 담기 바로구매하기예약주문

MM 스펙으로 최신형 차량입니다. 추운겨울에 실내서킷에서 최고의 차량과 함께하세요!1/10 버기중 최고급 하이엔드급차량입니다.




실내외 서킷이거나 야외에서 마음껏 스피드주행가능합니다.





Features


  • Based on the championship-winning 22 3.0 buggy
  • Track-ready weight of less than 1499 grams with full-size short, standard Orion electronics and 2.2” tires
  • Lightened 7075-T6 aluminum chassis
  • Ball diff with aluminum hubs and composite outdrives
  • Aluminum drive shafts with lightened axles
  • Lightweight motor plate with polycarbonate gear cover
  • 3-gear transmission for quicker acceleration
  • Ultra lightweight 0.5mm polycarbonate body
  • VLA front suspension geometry
  • Aluminum front axles
  • Gen II 12mm big-bore shocks
  • Transverse battery mounting option
  • Many popular option parts included as standard


Overview

The award-winning 22 3.0 buggy has set the standard for peak performance in modified 2WD racing. The 22 3.0 SPEC-Racer kit does the exact same thing for the spec class. Every part has been examined and, where necessary, optimized to give you a spec racer that can dominate the competition, right out of the box. 


Weighs in Under 1499 Grams 
No expensive aftermarket parts are required to meet the minimum ROAR weight. Extra pockets milled into the chassis, along an assortment of lightweight parts, allow the 22™ 3.0 SPEC-Racer to be built using kit hardware and still weigh in under 1499 grams with all electronics installed. This gives racers the freedom to meet the ROAR minimum by using bigger, more powerful batteries or strategically adding ballast to maximize performance. 


Lightweight Drivetrain 
Major weight savings in the drivetrain let racers extract more effective torque and top speed from stock motors. The innovative ball differential, with its aluminum hub and composite outdrives, is 12.7g lighter than the stock diff. The TLR® Direct Drive System weighs 9.3g less than a slipper assembly, and the aluminum driveshafts with lightened axles are 7.8g lighter than the stock steel CVAs. It all adds up to 29.8 grams of weight saved in the drivetrain alone. 


Ultra Lightweight Body 
The included body has the same cab-forward lines as the original 22 3.0 body but is made of lighter 0.5mm polycarbonate. This gives the buggy all the aerodynamic benefits of the original while saving over 20 grams of weight and lowering roll center at the same time. 

Lightweight Motor Plate 
A smaller motor plate designed specifically for the smaller spur gear sizes used in Spec-Class racing is included. It is CNC machined from 7075-T6 aluminum and paired with a polycarbonate gear cover to give racers the lightest and tidiest motor plate setup available. 

Proven 22 3.0 Platform Features 
The real genius in the 22 3.0 SPEC-Racer’s design is that team engineers were able to shave weight without sacrificing any of the most important features that make the standard 22 3.0 buggy such a dominating force in its class. These include the VLA front suspension geometry, revised motor location, transverse battery mounting, 2mm wider rear pivot, revised rear shock locations and more. 


Specifications

Scale: 1/10
Length: 15 in (382mm)
Width: 9.8 in (250mm)
Height: 5.8 in (148mm)
Wheelbase: 11.0 in (280mm)
Weight: 52.4 oz (1485g) (track ready)
Chassis: 2.5mm Milled Plate, 7075-T6 Aluminum
Suspension: Lower A-Arm, Upper Adjustable Link
Drivetrain: 2WD
Gear Pitch: 48P
Wheel Size: 2.2 in (56mm)
Kit/RTR: Kit
Shock Type: 12mm Big Bore, Oil Filled
Body: 22 3.0 Ultra Light Weight (0.5mm) Cab Forward, with optional Rear Fin
Ball Bearings: Full Rubber Seal Ball Bearings
Recommended Environment: Indoor/Outdoor
Assembly Time: 3-5 Hours

Needed To Complete:

  • Motor
  • Electronic Speed Control
  • Servo
  • Tires
  • Radio System
  • Pinion Gear
  • Charger

Manuals

Setup Sheets




학교 및 연구기관 구매가이드

내맘대로 결제하기

카카오톡 플러스 1:1 문의


WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close