PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
상품명 | (최고급 초경량화 1/10 버기)TLR 22 3.0 SPEC-Racer MM Race Kit |
---|---|
판매가 | 399,000원 |
적립금 | 3,990원 (1%) |
배송비 | 3,500원 (50,000원 이상 구매 시 무료) |
제조사 | TLR |
구매수량 | |
원산지 | 중국 |
코드명 | P000BDSK |
결제안내
현금결제 | 세금계산서 발행 | 도서산간 배송비 추가
|
배송비
무료 ~ 3,000원 (30만원 이상 무료) | 도서산간 배송비 추가
|
MM 스펙으로 최신형 차량입니다. 추운겨울에 실내서킷에서 최고의 차량과 함께하세요!1/10 버기중 최고급 하이엔드급차량입니다. 실내외 서킷이거나 야외에서 마음껏 스피드주행가능합니다. Features |
Overview |
The award-winning 22 3.0 buggy has set the standard for peak performance in modified 2WD racing. The 22 3.0 SPEC-Racer kit does the exact same thing for the spec class. Every part has been examined and, where necessary, optimized to give you a spec racer that can dominate the competition, right out of the box.
Weighs in Under 1499 Grams
No expensive aftermarket parts are required to meet the minimum ROAR weight. Extra pockets milled into the chassis, along an assortment of lightweight parts, allow the 22™ 3.0 SPEC-Racer to be built using kit hardware and still weigh in under 1499 grams with all electronics installed. This gives racers the freedom to meet the ROAR minimum by using bigger, more powerful batteries or strategically adding ballast to maximize performance.
Lightweight Drivetrain
Major weight savings in the drivetrain let racers extract more effective torque and top speed from stock motors. The innovative ball differential, with its aluminum hub and composite outdrives, is 12.7g lighter than the stock diff. The TLR® Direct Drive System weighs 9.3g less than a slipper assembly, and the aluminum driveshafts with lightened axles are 7.8g lighter than the stock steel CVAs. It all adds up to 29.8 grams of weight saved in the drivetrain alone.
Ultra Lightweight Body
The included body has the same cab-forward lines as the original 22 3.0 body but is made of lighter 0.5mm polycarbonate. This gives the buggy all the aerodynamic benefits of the original while saving over 20 grams of weight and lowering roll center at the same time.
Lightweight Motor Plate
A smaller motor plate designed specifically for the smaller spur gear sizes used in Spec-Class racing is included. It is CNC machined from 7075-T6 aluminum and paired with a polycarbonate gear cover to give racers the lightest and tidiest motor plate setup available.
Proven 22 3.0 Platform Features
The real genius in the 22 3.0 SPEC-Racer’s design is that team engineers were able to shave weight without sacrificing any of the most important features that make the standard 22 3.0 buggy such a dominating force in its class. These include the VLA front suspension geometry, revised motor location, transverse battery mounting, 2mm wider rear pivot, revised rear shock locations and more.
Specifications |
Scale: 1/10
Length: 15 in (382mm)
Width: 9.8 in (250mm)
Height: 5.8 in (148mm)
Wheelbase: 11.0 in (280mm)
Weight: 52.4 oz (1485g) (track ready)
Chassis: 2.5mm Milled Plate, 7075-T6 Aluminum
Suspension: Lower A-Arm, Upper Adjustable Link
Drivetrain: 2WD
Gear Pitch: 48P
Wheel Size: 2.2 in (56mm)
Kit/RTR: Kit
Shock Type: 12mm Big Bore, Oil Filled
Body: 22 3.0 Ultra Light Weight (0.5mm) Cab Forward, with optional Rear Fin
Ball Bearings: Full Rubber Seal Ball Bearings
Recommended Environment: Indoor/Outdoor
Assembly Time: 3-5 Hours
Needed To Complete:
게시물이 없습니다
게시물이 없습니다